Posted by: cstcoegypt Comments: 0

Product Features
Product characteristics

1 Semi-flush or surface mounting
2 Compatible with the latest EN standards
3 Lever reusable (non-glass break)
4 LED indicator

Start: When there is a fire manual confirmation, press the button on the panel of the AW-D135C(See Fig.5).
After the manual fire alarm is given, the ALARM indicator will remain lit.
Reset: The resetting key into the manual reset button on the side of the hole being depressed can make
restitution by piece, Reset the fire alarm control system and restore the AW-D135C to the normal monitoring

Technical parameters
Model AW-D135C
Main Voltage Zone 24V or 12V
Operating current monitoring status≤20uA, alarm status≤15mA
Application For indoor use only
Wiring The promise of two bus system(Zone +, Zone -)
Indicator Red alarm indicator flashes when it is under normal condition,
press the manual button lit work
Protection class IP30
Environmental Class A temperature range: -5 to 40°C (23~104°F)
Humidity: 5 to 95% RH, non-condensing
Materials and colors ABS, red
Mating Panel AW-CFP2166 fire alarm control panel
Size 99mm* 92mm* 66mm(with cover)
Weight about 95g